L300 V6-3.0L VIN R (2001)
1. Install EVAP canister vent solenoid to box on filler pipe.
NOTE: Ensure that vent solenoid "clicks" into engagement with locking tab on box.
IMPORTANT: The lid or shield for the EVAP canister vent solenoid must always be installed. The lid and the solenoid box shield the vent solenoid
from water and contaminants. This allows the vent solenoid to function properly.
2. Install shield on EVAP vent solenoid box.
NOTE: Ensure that vent pipe is properly positioned in retainer on fuel filler pipe lower attachment.
3. Install vent pipe and molded hose to quick connect on canister vent hose.
4. Install vent pipe hose to vent solenoid and secure with clamp.
5. Perform the "Service Bay Diagnostic Test" for the evaporative emission system using the Scan tool. This test will verify the integrity of the vapor
handling areas of the fuel system.
