L300 V6-3.0L VIN R (2001)
Clutch Slave Cylinder: Service and Repair
Clutch Slave Cylinder Replacement
CLUTCH SLAVE CYLINDER
REMOVAL
1. Remove transaxle.
2. Remove hydraulic line from slave cylinder.
3. Remove slave cylinder bolts and slave cylinder.
INSTALLATION
1. Install slave cylinder, use Loctite 592(R) (P/N21485278) thread sealant on the screws.
Torque:
Slave Cylinder Fasteners: 10 Nm (89 inch lbs.)
2. Connect hydraulic line to slave cylinder.
3. Bleed slave cylinder.
4. Install transaxle.