L Series V6-3.0L VIN R (2004)
1. Position the exhaust resonator into the vehicle and install the isolators.
Important: Do not tighten the clamp and crush the exhaust pipe.
2. Slide the muffler assembly onto the exhaust resonator and tighten the clamp.
Notice: Refer to Fastener Notice in Service Precaution.
3. Install the exhaust resonator to the exhaust manifold pipe and tighten the fasteners.
^
Tighten the exhaust manifold pipe-to-resonator bolts to 20 Nm (15 ft. lbs.).
4. Lower the vehicle from the hoist.
5. Check the entire exhaust system for leaks.
