L Series V6-3.0L VIN R (2004)
Starter Motor: Service and Repair
STARTER MOTOR REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: Record all pre-set radio stations.
1. Turn the ignition OFF.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Disconnect the negative battery cable.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
3. Jack or raise the vehicle on a hoist.
4. Remove the right front wheel.
IMPORTANT: The exhaust system remains hot for extended periods of time.
5. Disconnect the 2 starter solenoid electrical connections.
IMPORTANT: Loosening the fastener will allow the harness bracket to move enough to clear the starter using the J44830 or equivalent (#16
TORX) wrench.
6. Loosen the fastener securing the electrical harness bracket to block.
7. Remove the lower starter assembly to engine block bolt.
8. Lower the vehicle.