LS2 V6-3.0L VIN R (2000)
42. Install HVAC control to the I/P and install fasteners.
43. Torque fasteners.
Torque: 2.5 N.m (22 in-lbs)
44. Connect radio ground strap spade terminal, electrical connector(s), and antenna to rear of radio.
45. Install radio by sliding it into the guides on the instrument panel.
46. Install and tighten screws.
Torque: 2.5 N.m (22 in-lbs)
47. Connect center trim plate switch harnesses to switches and snap center trim plate into I/P.