LW100 L4-2.2L VIN F (2002)
9. Tighten hose clamp on filler pipe to fuel tank connecting hose.
Torque:
Fuel Fill Neck-to-Fuel Tank Clamp: 5 N.m (44 in-lbs)
10. Connect EVAP canister vent pipe at quick connect to canister vent hose.
11. Connect recirculation line (5/16") quick connection.
12. Tighten lower attachment screw on filler pipe to underbody.
Torque:
Fuel Fill Pipe-to-Body (Lower): 13 N.m (9.5 ft-lbs)
13. Connect the harness connector to EVAP vent solenoid.
14. Install wheelhouse inner liner to wheel opening.
15. Connect negative battery cable.
Torque:
Battery Terminal Bolts: 17 N.m (13 ft-lbs)