LW100 L4-2.2L VIN F (2002)
3. Install clutch hydraulic line assembly to fitting on transaxle.
NOTICE: Do not use mineral oil or a paraffin base oil in the hydraulic system. These fluids will damage the rubber parts in the cylinders. Only DOT
3 brake fluid should be used.
4. Add brake fluid as required and bleed clutch hydraulic system.
5. Inspect system for proper operation and fluid leaks. Repair as necessary.
6. Install battery tray fasteners and battery tray.
Torque:
Battery Tray Fasteners: 15 Nm (11 ft. lbs.)
7. Install UHFB case to battery tray and install bolt.
Torque:
UHFB Case Bolt: 9 Nm (80 inch lbs.)
