LW2 V6-3.0L VIN R (2000)
7. Coat lip of seal with a small amount of clean engine oil to aid in installation.
8. Use J-35268-A to install camshaft seal.
9. Ensure that camshaft seal is fully and evenly seated.
IMPORTANT: Use a new camshaft gear bolt. The required tightening method will stretch the bolt, to its yield point, therefore, the bolt is not
reusable.
10. Install new camshaft gear bolt using SA9140E Torque Angle Gauge.
IMPORTANT: Use J-42069-2 Camshaft Gear Locking Tool to hold camshaft gear and camshaft in place while tightening camshaft gear bolt.
-
Torque: 50 Nm (37 ft. lbs.) + 60° + 15°
11. Install timing belt. Refer to "Timing Belt Replacement".
12. Adjust timing belt. Refer to "Timing Belt Timing".
13. Install timing belt cover. Refer to "Timing Belt Cover Replacement".
14. Install front camshaft cover. Refer to "Camshaft Cover Replacement (Front)".
15. Install intake plenum. Refer to "Intake Plenum Replacement".
16. Install air cleaner assembly.
17. Connect negative battery cable.
