LW200 L4-2.2L VIN F (2003)
1. Install a quarter window into the opening. Refer to Urethane Adhesive Installation of Bodyside Stationary Windows (Sedan) (See: Procedures
)Urethane Adhesive Installation of Bodyside Stationary Windows (Wagon) (See: Procedures)Urethane Adhesive Installation of Bodyside
Stationary Windows (Lift Gate) (See: Liftgate Window Glass/Service and Repair/Procedures).
2. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
3. Install the rear upper garnish molding. Refer to Garnish Molding Replacement - Rear Upper (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Garnish Molding Replacement - Rear Upper) in Interior Trim.
4. Raise the rear seat back.
