SL L4-1.9L SOHC VIN 8 (1997)
Brake Master Cylinder: Service and Repair
Master Cylinder Removal/Installation
REMOVAL
1. Disconnect negative battery cable.
2. Remove brake fluid level sensor electrical connector from master cylinder reservoir.
CAUTION: After removing brake line fitting nuts, do not excessively pull or bend brake lines away from master cylinder.
3. Remove brake line fitting nuts from master cylinder.
CAUTION: Plug open lines and fittings to prevent brake fluid loss and contamination.
4. Remove two master cylinder-to-brake booster attachment nuts.
CAUTION: Be careful not to bend brake lines.
5. Remove master cylinder.
INSTALLATION
1. Position master cylinder onto brake booster studs and install fastening nuts.
^
Torque to 27 Nm (20 ft. lbs.)