SL L4-1.9L SOHC VIN 8 (1997)
c. Apply a 4.0 mm (0.080 inch) bead on the front of the oil pan and a 2.0 mm (0.040 inch) bead on the front cover. Install cover immediately.
3. Install the crankshaft timing gear retaining service tool SA9104E. It will align the gerotor oil pump during front cover installation.
4. Install the front cover and assembly fasteners and torque in sequence:
^
Front Cover (Perimeter Bolts): Torque to 30 Nm (22 ft. lbs.).
^
Front Cover Lower Center Bolt (Number 14): Torque to 10 Nm (89 inch lbs.)
5. Install the four oil pan fasteners: Torque to 9 Nm (80 inch lbs.)
