SL L4-1.9L SOHC VIN 8 (1997)
Alternator: Service and Repair
Removal
Generator Removal
WARNING: MAKE SURE THE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED PRIOR TO LIFTING. TO
HELP AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON
THE OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED. MAKE SURE HOIST DOES NOT CONTACT FUEL OR
BRAKE LINES.
1. Disconnect battery negative cable.
2. Remove accessory belt.
3. Raise vehicle on hoist.
4. Remove right wheel.
5. Remove right side splash shield.
Generator
6. Remove the generator splash shield.
(The CS121 generator does not have splash shield.)
7. Disconnect the field wires.