SW L4-1.9L DOHC VIN 7 (1993)
Water Pump: Service and Repair
WATER PUMP REMOVAL
CAUTION: DO NOT REMOVE CAP OR OPEN COOLING SYSTEM DRAINS FROM A HOT SYSTEM. ALLOW SYSTEM TO COOL FIRST.
1. Drain coolant.
Open the radiator drain plug and engine drain plug, and allow the coolant to drain into a suitable container. A two gallon container is required.
2. Remove accessory drive belt.
CAUTION: BE SURE THE VEHICLE IS SECURELY SUPPORTED. TO HELP AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A
HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END FROM WHICH COMPONENTS ARE BEING
REMOVED.
3. Jack or raise vehicle on a hoist.
4. Remove the right hand tire and inner wheel well splash shield.
IMPORTANT:The A/C compressor mounting bolts can also be removed and the compressor laid aside to access the water pump if the pump is
accessed from the top. Do not discharge the A/C system.
