SW2 L4-1.9L DOHC VIN 7 (1997)
58. Move console rearward.
59. Install cigarette lighter bulb through opening and rotate counterclockwise.
60. Connect cigarette lighter electrical connector.
61. Move console forward into position.
IMPORTANT: Make sure upper tabs on front of console engage sheet metal on lower I/P brace.
62. Install and tighten front console screws.
Torque: 1.2 N.m (11 in-lbs)
63. Install left and right lower trim panel extensions by inserting hinges into console openings. Then rotate closed and push in at dual lock locations.
64. For vehicles without console armrest:
a. Align rear of console with pin on mounting pad.
b. Install and tighten screws.
Torque: 1.6 N.m (14 in-lbs)
