SW2 L4-1.9L DOHC VIN 7 (1997)
Torque: 1.6 N.m (14 in.lbs.)
14. Install screw cover.
15. Install left trim panel extension by inserting hinges into console openings. Then rotate closed and push in at dual lock locations. Wait to install
right trim panel until fuse is installed during SIR system enabling
16. Connect window/mirror switch electrical connectors.
17. Install window/mirror switch by inserting front edge into opening. Then push rear edge down into position.
18. Insert bulb through opening until bulb socket is flush with cup holder. Push socket down to engage lock tab.
19. Install wiring harness to cup holder.
