SW2 L4-1.9L DOHC VIN 7 (1997)
Clutch Pedal Assembly: Service and Repair
REMOVAL
IMPORTANT: Record preset radio stations and clock time. Disconnect negative battery cable.
1. Remove upper trim panel screw caps by carefully prying up with a small screwdriver.
2. Remove upper trim panel screws.
3. Lift upper trim panel at clip locations on rear edge to disengage clips.
4. Pull panel rearward out of clips at bottom of windshield.
IMPORTANT: Be careful when removing or replacing upper trim panel not to damage VIN plate.
5. Remove upper trim panel.
IMPORTANT: Be careful when removing upper trim panel not to damage the trim panel seal.
6. Remove upper trim panel insulator.
