VUE AWD L4-2.2L VIN D (2005)
5. Remove receiver dehydrator from the condenser.
6. Install a protective cap to the receiver dehydrator to prevent contamination and desiccant saturation.
7. Remove the compressor hose from the condenser.
8. Install a protective cap to the compressor hose to prevent contamination and desiccant saturation.
9. Remove the CRFM bracket bolts from the radiator support.
10. Remove the CRFM brackets from the vehicle.
11. Lift the condenser while holding the upper retention tabs forward.
12. Remove the condenser from the vehicle.
INSTALLATION PROCEDURE