VUE AWD V6-3.5L VIN 4 (2004)
Drink Holders: Removal and Replacement
Cup Holder Replacement - Front Floor Console - Rear
Removal Procedure
1. Remove the front floor console. Refer toConsole Replacement - Front Floor (See: Console/Service and Repair/Console Replacement - Front Floor
) .
2. Pull all the way out on the cup holder.
3. Remove the screws from the cup holder track.
4. Remove the cup holder and the track from the console.
5. Pull to separate the cup holder from the track.
Installation Procedure
1. Install the cup holder to the track.
2. Position the track in the console assembly.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the console track screws.
Tighten the screw to 2.5 N.m (22 lb in).
4. Install the front floor console. Refer to Console Replacement - Front Floor (See: Console/Service and Repair/Console Replacement - Front Floor)
.