VUE AWD V6-3.5L VIN 4 (2004)
3. Install the outboard teardrop washer and bolt.
Tighten the bolt to 35 N.m (26 lb ft).
4. Install the nut to the outboard seat back frame.
Tighten the nut to 17 N.m (13 lb ft).
5. Install the nuts to the inboard seat back frame.
Tighten the nuts to 17 N.m (13 lb ft).
6. Position the recliner handle and spring. Install the recliner handle bolt.
CAUTION: The seat back frame springs are under tension. To avoid personal injury, use care when removing or installing the frame.