VUE AWD V6-3.5L VIN 4 (2004)
8. Use the J 38400 in order to spread the brake shoes apart (1).
9. Remove the wheel cylinder.
10. Clean the old sealant from the backing plate where the wheel cylinder was installed. Clean the sealant from the wheel cylinder if you are reusing
the wheel cylinder.
Installation Procedure
1. Use the J 38400 in order to spread the brake shoes apart (1).
2. Install the wheel cylinder.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the wheel cylinder bolts (2).
^
Tighten the bolts to 15 Nm (11 ft. lbs.).
4. Remove the cap from the brake pipe and install the brake pipe to the wheel cylinder.
^
Tighten the nut to 19 Nm (14 ft. lbs.).
5. Install the brake drum.