VUE AWD V6-3.5L VIN 4 (2004)
8. Install the rocker arm and shaft assemblies and bolts (1).
9. Tighten the left side rocker shaft retaining bolts in sequence. Tighten the bolts 2 turns at a time in sequence, to ensure that the rocker arms do not
bind on the valves.
9.1.
Tighten the bolts in sequence a first pass to 12 Nm (106 inch lbs.).
9.2.
Tighten the bolts in sequence a final pass to 24 Nm (17 ft. lbs.).
10. Tighten the right side rocker shaft retaining bolts in sequence. Tighten the bolts 2 turns at a time in sequence, to ensure that the rocker arms do not
bind on the valves.
11. Install the valve rocker arm cover.
