VUE AWD V6-3.5L VIN 4 (2004)
1. Install NEW seals (540), NEW gasket (541), cover (542), NEW grommets (544) and bolts (543).
2. Tighten the bolts in sequence.
^
Tighten the bolts to 12 Nm (106 inch lbs.).
3. Install the ignition coils (707) and bolts (708).
^
Tighten the bolts to 12 Nm (106 inch lbs.).
4. Install the wiring harness bracket bolt to the valve rocker arm cover.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
5. Connect the fuel injector connectors.
6. Install the intake manifold.
7. Connect the EVAP purge hose.
8. Connect the IAT sensor connector.
9. Connect the MAP sensor connector.
10. Connect the vacuum brake booster hose.
11. Connect the ECT sensor connector.
