VUE AWD V6-3.5L VIN 4 (2004)
5. On CVT equipped vehicles, install the shift cable clip to the steering gear.
6. Connect the intermediate shaft to the steering gear and install a new pinch bolt.
^
Tighten the intermediate pinch bolt to 34 Nm (25 ft. lbs.).
7. Connect the stabilizer links to the stabilizer bar.
Important: Hold the ball stud to prevent turning during installation of the nut.
8. Using the J 44015, seat the ball stud taper to 40 Nm (30 ft. lbs.).
