VUE AWD V6-3.5L VIN 4 (2004)
Rear Knuckle Alignment Link: Service and Repair
The content of this article reflects the changes identified in TSB - 05-03-09-005
Toe Link Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the toe link to knuckle nut and bolt.
3. Remove the toe link to support nut and bolt.
4. Remove the toe link from the vehicle.
Installation Procedure
1. Install the toe link to the support assembly.
Important:
^
Install the bolt with the head towards the front of the vehicle.