VUE AWD V6-3.5L VIN 4 (2004)
13.
Remove propeller shaft guard to rear drive module bolts and remove guard.
14.
Place a drain pan under the RDM to capture residual RDM fluid when separating RDM housing cover from RDM housing.
15.
Remove the RDM housing cover bolts (1) from RDM housing.
16.
Separate the RDM housing cover from the RDM housing.
17.
Carefully remove the RDM housing cover and drum from RDM housing.
18.
Remove and discard the pinion flange nut (1).
Notice:
Discard used nut. If the old nut is used, it may loosen over time.
