VUE AWD V6-3.5L VIN 4 (2004)
14.
Thoroughly clean and apply thread sealer Loctite(R) Threadlocker 262 (P/N 10953488) to the propeller shaft flange mounting bolt threads.
15.
Align the reference marks on the propeller shaft flange and the RDM input flange.
16.
Install the propeller shaft flange mounting bolts.
Tighten
Tighten Propeller Shaft Rear Flange-to-Rear Drive Module Bolts 50 Nm (37 ft-lbs).
17.
Install the propeller shaft underbody guard loop.
18.
Install the propeller shaft underbody guard loop bolts.
Tighten
Tighten Underbody Guard Loop Bolts to 24 Nm (18 ft-lbs).
