VUE FWD L4-2.4L (2008)
3. Install the J 38122-A (1), and a breaker bar to the balancer in order to prevent the balancer from rotating while tightening the bolt.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Tighten the crankshaft balancer bolt.
Tighten the bolt to 100 N.m (74 lb ft) plus an additional 125 degrees using the J 45059 .
5. Install the engine splash shield.
6. Install the drive belt. Refer to Drive Belt Replacement (LAT-2.4L) (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair)Drive Belt Replacement (LE5 2.4L) (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair) .
