VUE FWD L4-2.4L (2008)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement (LE5 2.4L 2.4L)
Crankshaft Balancer Replacement (LE5 2.4L)
Tools Required
*
J 38122-A Harmonic Balancer Holder
*
J 45059 Angle Meter
Removal Procedure
1. Remove the drive belt. Refer to Drive Belt Replacement (LAT-2.4L) (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair)Drive Belt Replacement (LE5 2.4L) (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair) .
2. Use J 38122-A to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
3. Remove and discard the crankshaft balancer bolt.
4. Remove the crankshaft balancer.
Installation Procedure