VUE FWD L4-2.4L Hybrid (2007)
1. Add the specified amount of PAG oil to the condenser. Refer to Refrigerant System Capacities.
2. Inspect the radiator to condenser seals for the proper position.
3. Install the condenser by guiding the tabs into the retention clips on the radiator. Press down to engage the retention clips.
4. Remove the protective cap from the compressor hose.
5. Install a new sealing washer to the compressor hose.
6. Install the compressor hose to the condenser.
Notice: Refer to Fastener Notice.
7. Install compressor hose nut to the condenser.
Tighten the nut to 16 N.m (12 lb ft).