VUE FWD V6-3.5L (2008)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
Heated Oxygen Sensor Replacement - Bank 2 Sensor 1
Tools Required
J 39194-B Heated Oxygen Sensor Wrench
Removal Procedure
Notice: Refer to Heated Oxygen Sensor Resistance Learn Reset Notice (See: Service Precautions/Heated Oxygen Sensor Resistance Learn Reset
Notice) .
1. Remove the intake manifold cover, if necessary. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair) .
2. Remove the connector position assurance (CPA) retainer.
3. Disconnect the engine wiring harness electrical connector (3) from the heated oxygen sensor (HO2S) electrical connector (2).
4. Remove the HO2S rosebud clip from the oil level indicator tube tab (1).