VUE FWD V6-3.5L (2008)
Positive: Service and Repair
Battery Positive and Negative Cable Replacement (LZ4-3.5L)
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement) .
2. Release the electronic control module (ECM) bracket from the battery cover and set it aside with the ECM still connected. Refer to Engine Control
Module Replacement (LE5 2.4L) (See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and Repair) .
3. Release the battery cover retaining tabs (2) and remove the battery cover (1).
4. Loosen the battery positive and negative cable nuts (2,3) and remove the battery positive and negative cables from the battery.
5. Remove the battery negative cable ground nut (1) and remove the battery negative cable ground from the body ground stud.
