xA L4-1.5L (1NZ-FE) (2006)
4. INSTALL TAILPIPE
a) Install a new gasket onto the front exhaust pipe.
b) Connect the 2 exhaust pipe supports, and install the tailpipe.
c) Install the clamp with the bolt as shown in the illustration.
Torque: 32 Nm (326 kgf-cm, 24 ft. lbs.)
5. CHECK FOR EXHAUST GAS LEAKS
6. INSTALL FRONT PANEL BRACE
a) Install the floor panel brace with the 2 bolts.
Torque: 20 Nm (204 kgf-cm, 14 ft. lbs.)
7. INSTALL REAR CONSOLE BOX
8. INSTALL SHIFT LEVER KNOB (for Manual Transaxle)
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. PERFORM INITIALIZATION
a) Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting the cable from the negative (-) battery terminal.