xA L4-1.5L (1NZ-FE) (2006)
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE NO. 7 CENTER CLUSTER MODULE KNOB
a. Detach the 3 claws and remove the center cluster module knob.
2. REMOVE NO. 5 CENTER CLUSTER MODULE KNOB
a. Detach the 3 claws and remove the center cluster module knob.
3. REMOVE NO. 6 CENTER CLUSTER MODULE KNOB
a. Detach the 3 claws and remove the center cluster module knob.
4. REMOVE CENTER CLUSTER MODULE INDICATOR LENS ASSEMBLY
a. Detach the 2 claws, and then remove the center cluster module.