scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2527 > < Initial Inspection and Diagnostic Overview|Page 2525
Page 3
background image

HINT:
-

o: Set

-

X: Not set or may be set according to the malfunctioning part when one side of the CAN bus wire opens

-

*: This DTC cannot be output when CAN communication is suspended.

HINT:
-

o: Set

-

X: Not set or may be set according to the malfunctioning part when one side of the CAN bus wire opens

-

*: This DTC cannot be output when CAN communication is suspended.

(a) Perform troubleshooting according to the combination of DTCs output.

-

ABS and Traction Actuator (Skid Control ECU) Communication Stop Mode:  See: Component Tests and General Diagnostics/ABS and
Traction Actuator (Skid Control ECU) Communication Stop Mode

-

Power Steering ECU Communication Stop Mode:  See: Component Tests and General Diagnostics/Power Steering ECU Communication
Stop Mode

-

Steering Angle Sensor Communication Stop Mode:  See: Component Tests and General Diagnostics/Steering Angle Sensor
Communication Stop Mode

-

Yaw Rate Sensor Communication Stop Mode:  See: Component Tests and General Diagnostics/Yaw Rate Sensor Communication Stop
Mode

Initial Inspection and Diagnostic Overview|Page 2527 > < Initial Inspection and Diagnostic Overview|Page 2525