xB L4-2.4L (2AZ-FE) (2009)
Evaporative Emission Control Canister: Service and Repair
Installation
2AZ-FE EMISSION CONTROL: CANISTER: INSTALLATION
INSTALLATION
1. INSTALL CANISTER
(a) Install the canister with the 2bolts and nut.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
(b) Install the wire harness
(c) Connect the connector.
(d) Connect the fuel tank vent hose.
-
Check that there are no scratches or foreign objects on the disconnected parts of the fuel tank vent connector and pipe before performing
the work.
-
After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling the quick connector.