xB L4-2.4L (2AZ-FE) (2009)
(c) Disconnect the fuel tank vent hose sub-assembly.
-
Remove any dirt and foreign objects from the fuel tank vent hose connector before performing the work.
-
Do not allow any scratches or foreign objects on the parts when disconnecting, as the fuel tank vent hose connector has the O-ring that
seals the pipe.
-
Perform the work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the disconnected fuel tank vent hose by covering it with a vinyl bag after disconnecting it.
-
If the fuel vent connector and pipe are stuck, push and pull them to release.
(d) Disconnect the connector.
(e) Separate the wire harness.
(f) Remove the 2 bolts and nut and remove the canister.