xB L4-2.4L (2AZ-FE) (2009)
Evaporative Emission Control Canister: Service and Repair
Removal
2AZ-FE EMISSION CONTROL: CANISTER: REMOVAL
REMOVAL
1. REMOVE CANISTER
(a) Disconnect the charcoal canister outlet hose.
(b) Disconnect the air inlet hose.
-
Remove any dirt and foreign objects from the air inlet hose connector before performing the work.
-
Do not allow any scratches or foreign objects to get on the parts when disconnecting, as the air inlet hose connector has an O-ring that seals
the pipe.
-
Perform the work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the air inlet hose after disconnection by covering it with a vinyl bag.
-
If the fuel vent connector and pipe are stuck, push and pull them to release.