seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch pedal: Removing and installing|Fitting > < Clutch pedal: Removing and installing

Leon Mk2

Removing
Removing
–  Remove the neutral overpass spring → Chapter.
Vehicles with switch on the clutch pedal
   
–  Unplug connector -1- of the clutch pedal switch.
–  Pull the the clutch pedal switch from its housing.
–  Remove the fixing bush for the clutch pedal switch It will be necessary to break it to remove it.
Continue for all vehicles
  N23-0142
Unblock the clutch pump actioning rod from the clutch pedal as follows:
–  Fit tool -T20059 B- on the housing lugs. Adjust the length of the points -T20059B/2-, in such a way that the pliers are left slightly opened.
–  Compress the housing lugs with tool -T20059 B-, and at the same time move the clutch pedal backwards.
  E30-0096
–  Remove the safety ring -A- from the left side of the pedal shaft To do this free the central tab with a screwdriver, and move downwards to remove it -arrows-.
  E30-0030
–  Remove the safety ring from the right side of the pedal shaft To do this lift the central tab with a screwdriver, and move the spring washer down -arrows-.
–  Move the pedal shaft to the right until the clutch pedal can be removed.
–  Remove the clutch pedal, together with the bearing bushes.
  E30-0029

Clutch pedal: Removing and installing|Fitting > < Clutch pedal: Removing and installing