seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Differential crown: removing and installing|Installation > < Differential crown: removing and installing

Leon Mk2

Removing
Removing
  Note!
t  Protect the roller bearings from damage and metal filings.
t  Before and after drilling the rivets, thoroughly clean the differential casing.
   
–  Drill the rivet heads from the bevelled side, with a Ø 12 mm drill bit.
–  Remove the rivets from their holes with a drift.
–  Heat the differential crown with the -SAT 1416- electric lower to 120 °C. Check the temperature with a digital thermometer -SAT 4002-.
  V39-1282
–  Place the differential casing in a press and seaparate the crown from the case. Use tool -U-40200/18-, locating the bevelled side facing the differential casing.
  E39-0009

Differential crown: removing and installing|Installation > < Differential crown: removing and installing