Leon Mk2
Pedal mechanism, clutch pump - Assembly overview |
1 - | Plug |
2 - | Securing panel |
q | Attachment for the master cylinder and the clutch pedal mount |
3 - | Seal |
q | Always replace. |
4 - | Hexagonal nut |
q | 25 Nm |
q | Self-locking |
q | Always replace. |
5 - | Support stand |
q | For housing the clutch pedal |
6 - | Bolt |
7 - | Clutch pedal switch -F36- |
q | Press the clutch pedal down for removal and fitting of the switch |
q | For removal, rotate it 45º to the left and remove it from its allotment |
q | Fit the clutch pedal switch into mount and turn 45º to right. |
8 - | Support stand |
q | For accommodation of the brake and accelerator pedals |
9 - | Clip nut |
10 - | Damper |
11 - | Mounting bracket |
12 - | Over-centre spring seat |
q | Install in pedal bracket |
13 - | Over-centre spring |
q | removing and fitting → Chapter |
14 - | Separation cap |
15 - | Bearing bush |
16 - | Clutch pedal |
q | removing and fitting → Chapter |
17 - | Upper connector cover |
18 - | Mounting |
q | removing and fitting → Item |
19 - | Hexagonal nut |
q | 25 Nm |
q | Self-locking |
q | Always replace. |
20 - | Circlip |
21 - | Flexible hose |
22 - | Clip |
23 - | Clutch master cylinder |
q | removing and fitting → Chapter |
24 - | Stop buffer |
25 - | Blind rivet nut |
26 - | Stop bracket |
27 - | Bolt |
q | To secure the clutch pedal stop on the pedal bracket |
28 - | Hexagonal nut |
q | 25 Nm |
q | Self-locking |
q | Always replace. |