Note | t
| Clean the grooves on the input shaft and lightly lubricate them with grease. Allocation: → Parts catalogue |
| t
| The clutch plate should always be free to move on the input shaft. |
| t
| Check if the dowel sockets for centering the gearbox with the engine are fitted and damage free, if not replace them. |
| t
| Ensure that the intermediate plate is correctly seated on the engine. |
| t
| When the battery is re-connected, depending on which version, the vehicle equipment will have to be encoded. Carry out the radio coding and adjust the clock. |
| –
| The fitting of the gearbox is carried out in the reverse order of removal operations. The engine/gearbox bracket should be fitted free from tension. |
| –
| To connect the gearbox to the engine, the gearbox is fitted so that the right hand side flanged shaft is rotated towards the upper part of the engine. |
| –
| Move the gearbox towards the engine, using the spindles on the support tool -T20138C-, position the gearbox until the dowel sleeves are in line with their allotments. |
| –
| Fit the left hand console on the gearbox before lifting the engine assembly. |
| –
| Adjust the gear selection mechanism → Chapter. |
| –
| Following fitting, the oil level in the gearbox must be checked → Chapter. |
|
|
|
