seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch pedal: Removing and installing|Installation > < Clutch pedal: Removing and installing

Leon Mk2

Removing
Removing
–  Disconnect the negative terminal of the battery.
  Note!
For vehicles fitted with a coded radio, first check the anti-theft code.
Clutch cables with automatic adjustment:
–  Press clutch pedal to the floor at least 5 times.
–  Tension the clutch cable and remove it from the gearbox → Chapter
Clutch cable without automatic adjustment:
–  Remove clutch cable from gearbox → Chapter
   
–  Remove the catch for the clutch and brake pedal shaft, on the clutch pedal side. To do this lift the tab with a screwdriver in the direction of the arrow -1- and remove catch in the direction of arrow -2-.
  V30-0392
–  Remove the catch for the clutch and brake pedal shaft, on the brake pedal side. To do this lift the central tab with a screwdriver, and move the catch down -arrows-.
–  Pull the brake/clutch pedal shaft to the right, until the clutch pedal can be removed.
–  Remove the clutch pedal.
  E30-0029

Clutch pedal: Removing and installing|Installation > < Clutch pedal: Removing and installing