Leon Mk2
| Clutch actioning: repairing |
Note!| t | With the ignition switched off, disconnect the earth strap. |
| t | For vehicles fitted with a coded radio, first check the anti-theft code. |
| t | Lubricate all points of support and sliding surfaces with -G 052 142 A2- grease. |
| 1 - | Support |
| q | First remove the steering column before removing the bracket → Running gear, axles, steering; Rep. Gr.48 |
| 2 - | 2 Nm |
| q | For support to the body |
| 3 - | Support |
| 4 - | Clutch cable |
| q | Checking functioning → Chapter |
| q | Removing and installing → Chapter |
| 5 - | Bellows |
| q | Fit to the bulkhead |
| 6 - | Housing plate |
| q | For the clutch cable in the clutch pedal |
| 7 - | Support |
| q | Fit so that the rubber guide -arrow- is in the orifice in the housing |
| 8 - | Rubber stop |
| q | Fit to the support stand |
| 9 - | 25 Nm |
| 10 - | 25 Nm |
| q | 5 units |
| q | For the support stand to the servobrake threaded bolt |
| 11 - | Washer |
| 12 - | Bearing bush |
| q | For the clutch pedal |
| q | Coat with MoS2 grease |
| 13 - | Clutch pedal |
| Removing and installing |
| 14 - | Brake and clutch pedal shaft |
| 15 - | Bearing bush |
| q | To fit in the steering column |
| 16 - | Bearing bush |
| q | Insert in the bearing bush → Item - and then seat the brake pedal |
| 17 - | Brake pedal |
| 18 - | Washer |
| 19 - | 25 Nm |
| 20 - | Support |
| q | It is bolted together with the battery console |
| 21 - | Gearbox |