seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch cable: removing and installing > < Working of clutch cables with automatic adjustment: checking

Leon Mk2

Putting clutch cable to work with automatic adjustment
Putting clutch cable to work with automatic adjustment
   
–  Remove the clutch cable from its location on the clutch release lever, pulling in the -direction of the arrow-.
–  Extract the rubber stop from its location in the gearbox casing.
  N30-0131
–  Slide cable -A- several times until the adjustment mechanism -B- can be compressed.
–  Tension the clutch cable with the tensioning cap or the strap → Chapter.
  E30-0016
Hook the clutch cable to the clutch release lever as described below:
–  Fit the rubber stop -3- into its location in the gearbox casing.
–  Fit the clutch cable into its location on the clutch release lever -1-.
–  Remove the automatic adjustment mechanism tensioning cap.
–  Checking the functioning of the clutch cable with automatic adjustment → Chapter.
  V30-0411

Clutch cable: removing and installing > < Working of clutch cables with automatic adjustment: checking