seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Gear box actioning: adjusting > < Remove the actioning cables together with the protective box and the counter-hold

Leon Mk2

Removing and fitting the selector rod bracket and the return lever
Removing and fitting the selector rod bracket and the return lever
Removal
–  Remove the insulation tray, if fitted: → Bodywork Repairs, installation work, exterior; Rep. Gr.50.
   
–  Remove the control cable -arrow 1- and the selector cable -arrow 2-.
–  Unbolt the selector rod with ball joint from the control finger -arrow 3-.
–  Remove the control finger by loosening the bolt -arrow 4-.
  N34-0443
–  Unbolt the selector rod bracket from the gearbox -arrow-.
A - long socket spanner, e/c 13 mm
Installation
Install in reverse order, taking the following into account:
–  Adjusting the gearbox drive mechanism → Chapter.
  N34-0444

Gear box actioning: adjusting > < Remove the actioning cables together with the protective box and the counter-hold