seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Checking operation of the ignition key withdrawal lock > < Checking

Leon Mk2

Adjusting
Adjusting
–  First check whether a coded radio is fitted. In this case, obtain anti-theft code.
–  With the ignition switched off, disconnect the battery earth strap.
–  Remove selector lever handle → Chapter.
–  Remove centre console trim → General body repairs, interior; Rep. Gr.68.
   
–  Remove connector -1- of printed circuit board.
–  Pull frame -arrows- with cover and printed circuit board up and off selector mechanism.
–  Remove centre console → General body repairs, interior; Rep. Gr.68.
  N37-0858
–  Unscrew bolt -arrow- for selector lever cable.
–  Move selector lever to “P” position.
–  Move selector shaft lever on gearbox to position “P”. Locking lever must engage in park lock wheel so that both front wheels are blocked (cannot be turned together in same direction).
–  Tighten bolt -arrow- → Item, → Item.
–  Install centre console → General body repairs, interior; Rep. Gr.68.
  N37-0830
–  Press frame -arrows- with cover and printed circuit board into selector mechanism.
–  Connect connector -1- of printed circuit board.
–  Install centre console trim → General body repairs, interior; Rep. Gr.68.
–  Install selector lever handle → Chapter.
–  Reconnect earth strap to battery.
–  Code radio → Radio, telephone, navigation; Rep. Gr.91.
–  Initialise electric windows and set clock → Booklet10.1.
  N37-0858

Checking operation of the ignition key withdrawal lock > < Checking