Leon Mk2
|
|
1 - | Gearbox |
2 - | Input shaft seal |
q | Renewing for gearbox date through 12 01 3 → Chapter |
q | Renewing for gearbox date from 13 01 3 → Chapter |
3 - | Slave cylinder with clutch release bearing |
q | Are one unit and can only be renewed together |
q | Do not wash out bearing; wipe only |
q | Renew noisy bearings together with slave cylinder |
4 - | Bolt |
q | Qty. 3 |
q | Always renew |
q | For metal slave cylinder housing, 12 Nm |
q | For plastic slave cylinder housing, 15 Nm |
q | Carefully tighten diagonally so that the bolt holes of the slave cylinder do not break off |
5 - | O-ring |
q | Always renew |
q | Pull onto line connection |
q | Moisten with brake fluid before installing |