seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Assembly overview - hydraulics (LHD) > < Removing

Leon Mk2

Installing
Installing
Installation is carried out in reverse order. During this step, observe the following:
  Note
Allocate all components according to → Electronic parts catalogue „ETKA“.
   
–  Push line -1- with seal -2- onto connection of master cylinder -4- until securing clip -3- engages audibly.
–  Test line by tugging on it.
–  Fold back the supply hose to its original form as required.
–  Hydraulic clutch system: bleeding of air → Chapter.
–  Install battery tray and battery → Electrical system; Rep. gr.27
–  Install the complete air filter housing, provided that this was previously removed → Rep. gr.23.
  A30-0156
Right-hand drive vehicles
–  If present, fold heat shield around the pipe/hose line -arrows-.
  N34-11205

Assembly overview - hydraulics (LHD) > < Removing