| –
| Removing the gear selector handle → Chapter. |
| –
| Tie the spring tips -1- on selector lever handle together using cable tie -3- as shown in illustration. |
| –
| Slide sleeve -2- of selector lever boot past retaining tabs on spring tips -arrow-. |
| –
| Remove cable tie and detach sleeve with selector lever boot from selector lever. |
| Installation is carried out in reverse order, noting the following: |
| Fitting position of selector lever boot: |
| l
| The longer side of the retaining frame for the selector lever boot faces the driver's side. |
|
|
|
