SEAT Workshop Service and Repair Manuals

Special tools and workshop equipment required

• ◆ V.A.G 1331 Torque wrench

Checking

• ‒ Take selector lever cable off selector shaft lever on gearbox.

• ◆ Do not bend or kink the selector lever cable.

• ‒ Move selector lever from "P" to "1".

• ● Selector lever mechanism and selector lever cable must move freely. If necessary renew selector lever cable or service selector lever mechanism.

• ‒ Place selector lever cable on selector shaft lever.
• ‒ Removing and installing selector lever cable .
• ‒ Dismantling and assembling shift mechanism => Page 37-5.

Adjusting

• ‒ → Loosen adjustment screw (arrow) on selector lever in selector lever housing.
• ‒ Bring selector shaft lever in position "P" on gearbox. Locking lever must engage in park lock wheel, both front wheels blocked.
• ‒ Selector lever in "P" position.
• ‒ Tighten adjustment screw (arrow) on selector lever in selector lever housing to 11 Nm.